Oring IES-1062GT Industrial 8-port Unmanaged Ethernet Switch

by | Jun 30, 2015 | Industrial Ethernet Switch, ORing

Oring IES-1062GTIES-1080/1062 series are unmanaged Ethernet switches with 6×10/100Base-T(X) and 2x100Base-FX, 10/100/1000Base-T(X), 1000Base-SX or 1000Base- LX ports. IES-1080/1062 series support redundant power input, relay output alarm, and surge protection. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environments.

Feature :

  • IES-1080 provide 8×10/100Base-T(X) ports
    • IES-1062GT provide 6×10/100Base-T(X) and 2×10/100/1000Base-T(X) ports
    • IES-1062FX series provide 6×10/100Base-T(X) and 2x100Base-FX fiber ports
    • IES-1062GF series provide 6×10/100Base-T(X) and 2x1000Base-X fiber ports
    • Triple redundant DC power inputs of terminal block and power jack
    • Support auto-negotiation and auto-MDI/MDI-X
    • Support store and forw ard transmission
    • Support flow control
    • Warning system by relay output
    • Rigid IP-30 housing design
    • DIN-Rail and wall mounting enabled

Specification :

ORing Switch Model IES-1062GT
Physical Ports
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX 2
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX 6
Technology
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
MAC Table 8192 MAC addresses
Processing Store-and-Forward
LED Indicators
Power Indicator Green : Power LED x 3
Fault Indicator Amber : Indicates PWR1 or PWR2 failure occurred
10/100/1000Base-T(X) / Fiber Port Indicator Green for port Link/Act. Amber for 100Mbps indicator
10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act. Amber for Duplex/Collision
Fault Contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power Triple DC inputs. 12~48VDC on 7-pin terminal block, 12~45VDC on power jack
Power Consumption (Typ.) 7 Watts
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 52(W)x106.1(D)x144.3(H) mm
Weight (g) 677  g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) 368,351
Warranty 5 years

Related Posts