Oring IDS-5042+ Industrial 4-port RS232/422/485 to 2-port 10/100TX Device Server

by | Jun 18, 2015 | ORing

Oring IDS-5042+IDS-5042 series is an innovative secure 4-port RS-232/422/485 to 2 ports LAN secure device server featuring the standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP. In addition, the Windows utility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass-Through, DDNS, and PPPoE make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On the other hand, IDS-5042 series can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS-5042 series features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission.
IDS-5042 series supports RS-232/422/485 and provides dual redundant power inputs 12~48 VDC on terminal block to guarantee a non-stop operation. Further, IDS-5042+ features PoE P.D. (Power Device) function with 1kv isolation on the PoE port. With wide operating temperature, -10~70°C, and rugged IP- 30 housing design, IDS-5042 series could operate in the harsh industrial environment. Therefore, IDS-5042 series is the best solution to the high demand of secure serial to Ethernet critical data communication.

Feature :

  • Operating Modes : Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
  • Redundant multiple host devices :
    5 host devices : Virtual COM, TCP Server, TCP Client mode
    4 IP ranges : UDP
  • NAT Pass-Through : the user can manage IDS-5012 through NAT router
  • Security : SSL data encryption ; secured management by HTTPS and SSHIP Access
    IP White List
  • Internet Communication : PPPoE authentication
  • Update DNS Hostname : DDNS
  • Dual redundant Ethernet port support redundant mode(Recovery time < 10ms)
  • Ethernet switch mode enable Daisy Chain
  • Event Warning by Syslog, Email, SNMP trap, and Beeper
  • Configurable by Web-based and Windows utility (DS-Tool)
  • 1KV isolation for PoE P.D. port of IDS-5042+
  • Various Windows O.S. supported :
    Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/Windows 7(32/64bit)

Specification :

ORing Media Converter Model IDS-5042 IDS-5042+
Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX 2 2
PoE Feature – PoE P.D. Present at ETH2 Power Device (IEEE 802.3af):
IEEE 802.3af compliant input interface
Power consumption: 8Watts max.
Over load and short circuit protection
Isolation Voltage: 1000 VDC min.
Isolation Resistance : 108 ohms min
Serial Ports
Connector DB9(male) x 4
Operation Mode RS-232 / RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool
Serial Baud Rate 110 bps to 460.8 Kbps
Data Bits 5, 6, 7, 8
Parity odd, even, none, mark, space
Stop Bits 1, 1.5, 2
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS-422 Tx+,Tx-, Rx+, Rx-,GND
RS-485 (4-wire) Tx+,Tx-, Rx+, Rx-,GND
RS-485 (2-wire) Data+, Data-,GND
Flow Control XON/XOFF, RTS/CTS, DTR/DSR
Network Features
Network Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS
LED Indicators
Power Indicator PWR 1(2) / Ready :
Red On : Power is on and booting up
Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly
Green On : Power is on and functioning Normally
Green Blinking : Located by Administrator
10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act at 100Mbps.
Amber for port Link/Act at 10Mbps.
Serial TX / RX LEDs Red : Serial port is receiving data
Green : Serial port is transmitting data
Fault Indicator Red : Indicate unexpected events occurred
Fault Contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power Dual 12~48VDC on 6-pin terminal block Triple DC inputs, 48VDC from PoE and Dual 12~48VDC on 6-pin terminal block
Power Consumption (Typ.) 5.5 watts 5.5 watts
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 52(W) x 106.1(D) x 144.3(H) mm (2.05×4.18×5.68 inch.)
Weight (g) 678 g 682 g
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 52(W) x 106.1(D) x 144.3(H) mm (2.05×4.18×5.68 inch.)
Weight (g) 678 g 682 g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -10 to 70°C (14 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A,
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) 569,972
Warranty 5 years

Related Posts