IDS-5042 series is an innovative secure 4-port RS-232/422/485 to 2 ports LAN secure device server featuring the standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP. In addition, the Windows utility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass-Through, DDNS, and PPPoE make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On the other hand, IDS-5042 series can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS-5042 series features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission.
IDS-5042 series supports RS-232/422/485 and provides dual redundant power inputs 12~48 VDC on terminal block to guarantee a non-stop operation. Further, IDS-5042+ features PoE P.D. (Power Device) function with 1kv isolation on the PoE port. With wide operating temperature, -10~70°C, and rugged IP- 30 housing design, IDS-5042 series could operate in the harsh industrial environment. Therefore, IDS-5042 series is the best solution to the high demand of secure serial to Ethernet critical data communication.
Feature :
- Operating Modes : Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
- Redundant multiple host devices :
5 host devices : Virtual COM, TCP Server, TCP Client mode
4 IP ranges : UDP - NAT Pass-Through : the user can manage IDS-5012 through NAT router
- Security : SSL data encryption ; secured management by HTTPS and SSHIP Access
IP White List - Internet Communication : PPPoE authentication
- Update DNS Hostname : DDNS
- Dual redundant Ethernet port support redundant mode(Recovery time < 10ms)
- Ethernet switch mode enable Daisy Chain
- Event Warning by Syslog, Email, SNMP trap, and Beeper
- Configurable by Web-based and Windows utility (DS-Tool)
- 1KV isolation for PoE P.D. port of IDS-5042+
- Various Windows O.S. supported :
Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/Windows 7(32/64bit)
Specification :
ORing Media Converter Model | IDS-5042 | IDS-5042+ |
Physical Ports | ||
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX | 2 | 2 |
PoE Feature | – | PoE P.D. Present at ETH2 Power Device (IEEE 802.3af): IEEE 802.3af compliant input interface Power consumption: 8Watts max. Over load and short circuit protection Isolation Voltage: 1000 VDC min. Isolation Resistance : 108 ohms min |
Serial Ports | ||
Connector | DB9(male) x 4 | |
Operation Mode | RS-232 / RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool | |
Serial Baud Rate | 110 bps to 460.8 Kbps | |
Data Bits | 5, 6, 7, 8 | |
Parity | odd, even, none, mark, space | |
Stop Bits | 1, 1.5, 2 | |
RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND | |
RS-422 | Tx+,Tx-, Rx+, Rx-,GND | |
RS-485 (4-wire) | Tx+,Tx-, Rx+, Rx-,GND | |
RS-485 (2-wire) | Data+, Data-,GND | |
Flow Control | XON/XOFF, RTS/CTS, DTR/DSR | |
Network Features | ||
Network Protocols | ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS | |
LED Indicators | ||
Power Indicator | PWR 1(2) / Ready : Red On : Power is on and booting up Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly Green On : Power is on and functioning Normally Green Blinking : Located by Administrator |
|
10/100Base-T(X) RJ45 Port Indicator | Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps. |
|
Serial TX / RX LEDs | Red : Serial port is receiving data Green : Serial port is transmitting data |
|
Fault Indicator | Red : Indicate unexpected events occurred | |
Fault Contact | ||
Relay | Relay output to carry capacity of 1A at 24VDC | |
Power | ||
Redundant Input Power | Dual 12~48VDC on 6-pin terminal block | Triple DC inputs, 48VDC from PoE and Dual 12~48VDC on 6-pin terminal block |
Power Consumption (Typ.) | 5.5 watts | 5.5 watts |
Overload Current Protection | Present | |
Reverse Polarity Protection | Present | |
Physical Characteristics | ||
Enclosure | IP-30 | |
Dimensions (W x D x H) | 52(W) x 106.1(D) x 144.3(H) mm (2.05×4.18×5.68 inch.) | |
Weight (g) | 678 g | 682 g |
Physical Characteristics | ||
Enclosure | IP-30 | |
Dimensions (W x D x H) | 52(W) x 106.1(D) x 144.3(H) mm (2.05×4.18×5.68 inch.) | |
Weight (g) | 678 g | 682 g |
Environmental | ||
Storage Temperature | -40 to 85°C (-40 to 185°F) | |
Operating Temperature | -10 to 70°C (14 to 158°F) | |
Operating Humidity | 5% to 95% Non-condensing | |
Regulatory Approvals | ||
EMI | FCC Part 15, CISPR (EN55022) class A, | |
EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 | |
Shock | IEC60068-2-27 | |
Free Fall | IEC60068-2-32 | |
Vibration | IEC60068-2-6 | |
Safety | EN60950-1 | |
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) | 569,972 | |
Warranty | 5 years |