Oring IDS-5012IDS-5012 is an innovative secure 1-port RS-232/422/485 to 2 port LAN serial to Ethernet device server featuring the standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP. In addition, the Windows utility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass-Through, DDNS, and PPPoE make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On the other hand, IDS-5012 can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS-5012 features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission.

IDS-5012 supports RS-232/422/485 and provides dual redundant power inputs, 12~48 VDC, on DC power jack and terminal block to guarantee a nonstop operation. With wide operating temperature, -40~70°C, and rugged IP-30 housing design, IDS-5012 could operate in the harsh industrial environment. Therefore, IDS-5012 is the best solution to the high demand of secure serial to Ethernet critical data communication.

Feature :

  • Operating Modes : Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
  • Redundant multiple host devices :
    5 host devices : Virtual COM, TCP Server, TCP Client mode 4 IP ranges : UDP
  • NAT Pass-Through : the user can manage IDS-5012 through NAT router
  • Security : SSL data encryption ; secured management by HTTPS and SSHIP Access : IP White List
  • Internet Communication : PPPoE authentication
  • Update DNS Hostname : DDNS
  • Dual redundant Ethernet port support redundant mode(Recovery time < 10ms)
  • Ethernet switch mode enable Daisy Chain
  • Event Warning by Syslog, Email, SNMP trap, and Beeper
  • Configurable by Web-based and Windows utility (DS-Tool)
  • Various Windows O.S. supported :
    Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/Windows 7(32/64bit)

Specification :

ORing Media Converter Model IDS-5012
Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX 2
Serial Ports
Connector DB9(male) x 1
Operation Mode RS-232 / RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool
Serial Baud Rate 110 bps to 460.8 Kbps
Data Bits 5, 6, 7, 8
Parity odd, even, none, mark, space
Stop Bits 1, 1.5, 2
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS-422 Tx+,Tx-, Rx+, Rx-,GND
RS-485 (4-wire) Tx+,Tx-, Rx+, Rx-,GND
RS-485 (2-wire) Data+, Data-,GND
Flow Control XON/XOFF, RTS/CTS, DTR/DSR
Network Features
Network Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS
LED Indicators
Power Indicator PWR 1(2) / Ready :
Red On : Power is on and booting up.
Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly.
Green On : Power is on and functioning Normally.
Green Blinking : Located by Administrator.
10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps.
Serial TX / RX LEDs Red : Serial port is receiving data
Green : Serial port is transmitting data
Power
Redundant Input Power Dual DC inputs. 12~48VDC on 3-pin terminal block and power jack
Power Consumption (Typ.) 4 watts
Overload Current Protection Present
Reverse Polarity Protection Present on terminal block
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 72(W) x 29.4(D) x 123.4(H) mm (2.83×1.16×4.86 inch.)
Weight (g) 327g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensin
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A,
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) 533,615
Warranty 5 years