IDS-5011F is an innovative secure 1-port RS-232/422/485 to 1-port optic fiber Ethernet port secure serial to Ethernet device server featuring the standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP. In addition, the Windows utility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass-Through, DDNS, and PPPoE make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On the other hand, IDS-5011F can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS-5011F features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission. IDS-5011F provides dual redundant power inputs, 12~48 VDC, on DC power jack and terminal block to guarantee a non-stop operation. With wide operating temperature, -40~70°C, and rugged IP-30 housing design, IDS-5011F could operate in the harsh industrial environment. Therefore IDS-5011F is the best solution to the high demand of secure serial to Ethernet critical data communication.
Feature :
- Operating Modes: Virtual Com, Serial Tunnel, TCP Server,TCP Client, UDP
- Redundant multiple host devices : 5 host devices : Virtual COM, TCP Server, TCP Client mode; 4 IP ranges : UDP
- NAT Pass-Through : the user can manage IDS-5011F through NAT router
- Security: SSL data encryption; secured management by HTTPS and SSH: IP Access: IP White List
- Internet Communication: PPPoE
- Update DNS Hostname: DDNS
- Event Warning by Syslog, Email, SNMP trap, and Beeper
- Configurable by Web-based and Windows utility (DS-Tool)
- Various Windows O.S. supported: Windows NT/2000/ XP/ 2003/VISTA (32bit/64bit) /Windows 7 (32bit/64bit)
Specification :
ORing Media Converter Model | IDS-5011F-MM-SC | IDS-5011F-SS-SC |
Physical Ports | ||
Fiber Ports Number | 1 | 1 |
Fiber Ports Standard | 100Base -FX | 100Base -FX |
Fiber Mode | Multi-mode | Single-mode |
Fiber Diameter (μm) | 62.5/125 μm 50/125 μm | 9/125 μm |
Fiber Optical Connector | SC | SC |
Typical Distance (km) | 2 km | 30 km |
Wavelength (nm) | 1310 nm | 1310 km |
Max. Output Optical Power (dBm) | -14 dBm | -8 dBm |
Min. Output Optical Power (dBm) | -23.5 dBm | -15 km |
Max. Input Optical Power (Saturation) | 0 dBm | 0 dBm |
Min. Input Optical Power (Sensitivity) | -31 dBm | -34 dBm |
Link Budget (dB) | 7.5 dB | 19 dB |
Connector | DB9(male) x 1 | |
Operation Mode | RS-232 / RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool / web interface | |
Serial Baud Rate | 110 bps to 460.8 Kbps | |
Data Bits | 5, 6, 7, 8 | |
Parity | odd, even, none, mark, space | |
Stop Bits | 1, 1.5, 2 | |
RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND | |
RS-422 | Tx+,Tx-, Rx+, Rx-,GND | |
RS-485 (4-wire) | Tx+,Tx-, Rx+, Rx-,GND | |
RS-485 (2-wire) | Data+, Data-,GND | |
Flow Control | XON/XOFF, RTS/CTS, DTR/DSR | |
Network Features | ||
Network Protocols | ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS | |
LED Indicators | ||
Power Indicator | PWR 1(2) / Ready : Red On : Power is on and booting up Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly Green On : Power is on and functioning Normally Green Blinking : Located by Administrator |
|
100Base-FX with SC Connector | Green for port Link/Act at 100Mbps | |
Serial TX / RX LEDs | Red : Serial port is receiving data Green : Serial port is transmitting data |
|
Power | ||
Redundant Input Power | Dual DC inputs. 12~48VDC on 3-pin terminal block and power jack | |
Power Consumption (Typ.) | 4 watts | |
Overload Current Protection | Present | |
Reverse Polarity Protection | Present on terminal block | |
Physical Characteristics | ||
Enclosure | IP-30 | |
Dimensions (W x D x H) | 72(W) x 29.4(D) x 123.4(H) mm (2.83×1.16×4.86 inch.) | |
Weight (g) | 325 g | |
Environmental | ||
Storage Temperature | -40 to 85°C (-40 to 185°F) | |
Operating Temperature | -40 to 70°C (-40 to 158°F) | |
Operating Humidity | 5% to 95% Non-condensing | |
Regulatory Approvals | ||
EMI | FCC Part 15, CISPR (EN55022) class A, | |
EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 | |
Shock | IEC60068-2-27 | |
Free Fall | IEC60068-2-32 | |
Vibration | IEC60068-2-6 | |
Safety | EN60950-1 | |
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) | 561,145 | 562,542 |
Warranty | 5 years |