Oring IBS-102FX-SS-LC Industrial 2-port optical bypass switch for fiber optical network with 4xLC duplex Connector

by | Jun 16, 2015 | ORing

Oring IBS-102FX-SS-LCIBS-102FX series are the external Bypass switches for 100M/1G/10G fiber optical networks. These fiber optical bypass switches protect the network from failures and subsequent maintenance by ensuring network integrity during power loss. Each of these fiber optical bypass switches includes Network ports and Monitor ports. The Network ports are used for connection to main-network connections and provide protection mechanism, and the Monitor ports are used for down-link local networking device. When the power is on, the operation mode of the Bypass switch is set to Normal, and the local networking device is connected with main-network. When power failure occurs, the Bypass switch is swiftly set to bypass mode to isolate the main-network from the local networking device.

Feature :

  • Support 100M/1G/10G optical bypass function of 2 port duplex or 4 ͑port simplex fiber connection
  • Different models supported for multi-mode or single-mode optical ͑fiber
  • Low insertions loss ͑
  • Throughput not affected and no extra delay
  • Bypass switching time < 10ms
  • Dual wide-range power inputs: 12~48VD
  • Relay output for power failure warning
  • Rigid IP-30 housing design
  • DIN-Rail/Wall-mount installation

Specification :

ORing Bypass Switch Model IBS-102FX-SS-LC IBS-102FX-MM-LC
Physical Ports
LC connector 4 Duplex Single-mode LC connector 4 Duplex Multi-mode LC connector
Fiber Ethernet
Optical Fiber Single-mode: 9/125μm Multi-mode: 50/125μm or 62.5/125μm
Operating Wavelength 1260 ~ 1570 nm 780 ~ 1350 nm
Insert loss typical1.2 dB , Maximun 1.6 dB < 1.0 dB
Switch time < 10ms  < 10ms
DIP Switch Settings
DIP Swicth No.1 Power-1 failed warning detection – (On) relay enable (Off) relay disable
DIP Swicth No.2 Power-2 failed warning detection – (On) relay enable (Off) relay disabl
LED Indicators
Power Indicator Green : Power LED x 2
Normal indicator Green On : Operated in normal mode
Fault indicator Amber : Indicates power failure occurred
Fault contact
Relay Relay output for power failure warning
Power
Redundant Input Power Dual 12~48 VDC power inputs at DC-Jack and 4-pin terminal block
Power Consumption (Typ.) 2.7 watts 2.7 watts
Overload Current Protection Present
Reverse Polarity Protection Present on terminal block
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 26.1(W) x 94.9(D) x 144.3(H) mm (1.03 x 3.74 x 5.68 inch.)
Weight (g) 405 g 405 g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A,
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

Related Posts