IAP-6701N-WG+ is a reliable IP-67 outdoor IEEE 802.11 b/g WLAN Access Point with 1 PoE P.D. Ethernet port. It can be configured to operate in AP/Bridge/Repeater/AP-Client/Client mode. It is specifically designed for the toughest industrial environments. In combination with its IP-67 design and the superb management functionality. IAP-6701N-WG+ provide a waterproof, and dust-tight connection. And IAP-6701N-WG+ provide one N-type connector, that can install any N-type antenna to extended communication distance. You are able to configure IAP-6701N-WG+ by WEB interface via LAN port or WLAN interface. In addition, IAP-6701NWG+ also provides P.D. feature which is fully compliant with IEEE802.3af PoE P.D. specification to save the layout cost of power line. The IAP-6701NWG+ can be easily adopted in almost all kinds of applications and provides the most rugged solutions for managing your network in outdoor. Therefore, IAP-6701N-WG+ is one of the best outdoor communication solutions for wireless applications.
Feature :
- WLAN interface supports up to 54Mbps link speed
- Various kinds of operation modes supported : AP/Bridge/Repeater/ AP-Client/Client mode
- Various kinds of encryption supported : WEP/WPA/WPA-PSK(TKIP,AES) /WPA2/ WPA2-PSK (TKIP,AES) /802.1X Authentication
- Supports X-Roaming < 100 ms
- Supports external N-type antenna install
- Supports wireless load balance
- Wireless connecting status monitoring
- Versatile modes & event alarm by e-mail
- HTTPs & SSH protocol supported for secured management
- IP table to prevent access from unauthorized IP address
- Event Warning by Syslog, Email, SNMP Trap
- IP Configurable by Windows utility (AP-Tool)
Specification :
ORing Media Converter Model | IAP-6701N-WG+ |
Physical Ports | |
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE P.D. | Fully compliant with IEEE 802.3af Power Device specification Over load and short circuit protection Isolation Voltage : 1000 VDC min Isolation Resistance : 108 ohms min |
WLAN interface | |
Operating Mode | AP/Bridge/Repeater/AP-Client/Client |
Antenna | Built-in 12dBi panel antenna(with option to install an external N-type antenna to extend communication distance) |
Radio Frequency Type | DSSS,OFDM |
Modulation | IEEE802.11b : CCK, DQPSK, DBPSK IEEE802.11g : OFDM with BPSK, QPSK, 16QAM, 64QAM |
Frequency Band | America/FCC : 2.412~2.462 GHz (11channels) Europe CE/ETSI : 2.412~2.472 Ghz (13 channels) |
Transmission Rate | IEEE802.11b : 1/ 2/ 5.5/ 11 Mbps IEEE802.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps |
Transmit Power | IEEE802.11b : 18dBm IEEE802.11g : 14dBm |
Receiver Sensitivity | -80dBm @ 11Mbps, PER< 8%; -65dBm @ 54Mbps, PER< 10% |
Encryption Security | WEP : (64-bit ,128-bit key supported) WPA /WPA2 : IEEE802.11i(WEP and AES encryption) WPA-PSK (256-bit key pre-shared key supported) 802.1X Authentication supported TKIP encryption |
Wireless Security | SSID broadcast disable |
Protocol Support | |
Protocol | ARP, BOOTP, DHCP, DNS, HTTPs, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, STP (IEEE 802.1D) |
Power | |
Input Power | 48 VDC from PoE |
Power Consumption (Typ.) | 6 Watts |
Physical Characteristics | |
Enclosure | IP-67 |
Dimensions (W x D x H) | 197.5(W) x 63(D) x 197.5(H) mm (7.80×6.34×7.80 inch.) |
Weight (g) | 1040g |
Environmental | |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Operating Temperature | -20 to 70°C (-4 to 158°F) |
Operating Humidity | 0~100% Non-condensing |
Regulatory Approvals | |
EMI | FCC Part 15, CISPR (EN55022) class A, |
EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-32 |
Vibration | IEC60068-2-6 |
Safety | EN60950-1 |
Warranty | 3 years |