IP66 day-and-night vandal-proof fixed dome IP cameras for outdoors
To enhance video image quality, the VPort 26 series is equipped with a 2.8 to 11 mm vari-focal lens that meets any viewing angle and distance requirements. With the built-in removeable IR-cut filter, and automatic switching from color to B/W images, the VPort 26 series is suitable for day-and-night use. Along with 3D-DNR (3D Digital Noise Reduction) function, which can greatly reduce noises of video frames, and WDR (Wide Dynamic Range), the VPort 26 series provides clear images under back light circumstances.
Rugged Hardware Design
The VPort 26 series is specially designed for outdoor applications with the following features: IP66 rain and dust protection, high EMI/surge protection, -40 to 50°C operating temperature without a fan or heater required, metal housing, and vandal-proof dome cover. In addition, the camera is built in a dehumidified membrane for spreading out the moisture inside the camera. Users can choose either the model with PoE (Power over Ethernet, 802.3af) function, or the wired power input model with 12/24 VDC or 24 VAC.
High Video Performance and Network Security
The VPort 26 series is designed to provide both H.264 and MJPEG video streams and transmit up to 3 independent video streams (2 in H.264, and 1 in MJPEG) simultaneously. The camera is able to encode and transmit up to 30 FPS for each of the H.264 and MJPEG streams. Advanced network security functions, such as 802.1x and SSH, are also provided to prevent unauthorized access or data hijack, which is critical for most surveillance applications.
Feature :
Features and Benefits
- -40 to 50°C operating temperature; no heater or fan required
- Maximum 800 x 600 (SVGA) resolution at 30 FPS
- High quality video image with 3D-DNR, BLC, and WDR
- 2.8 to 11 mm day-and-night vari-focal lens with a built-in removeable IR-cut filter (ICR)
- Up to 0.01 lux illumination performance for color images
- DynaStream™ supported for optimized network efficiency
- ONVIF comformity for standardization and interoperability
- 802.1X, HTTPS, and SSH supported for advanced network security
The VPort 26 series is a vandal-proof, IP66-rated, fixed dome IP camera desinged for outdoor use. With SVGA (max. 800 x 600 ) resolution, H.264/MJPEG 3 simutaneous video streams, and day-andnight camera lens, the VPort 26 series is well-suited for outdoor video surveillance applications.
Specification :
| Sensor | 1/3” SVGA progressive scan CMOS |
| Lens | • Focal length= 2.8 to 11 mm • Wide-end: F=1.4, Diagonal 125.2°, horizontal 97.1°, vertical 71.1° • Tele-end: F=2.8, diagonal 31.6°, horizontal 25.3°, vertical 19.0° |
| Auto Iris Type | DC drive |
| Camera Angle | Pan: ±175°; Tilt: 0 to 85°; Rotation: ±180° |
| Minimum illumination (low light sensitvity) | 0.01 lux, F=1.2 |
| Synchronization | Internal |
| Gamma Correction | 0.45 |
| White Balance | ATW/AWB (range: 3200 to 10000°K) |
| S/N Ratio | 52dB (TYP) (Gamma, Aperture, AGC Off; 3D-DNR On) |
| ICR Control | Auto |
| DNR | Built-in 3D-DNR (3D digital noise reduction) |
| WDR | 94 dB, Level 1 to Level 9 |
| De-mist | Off, low, medium, high |
| AGC Control | Level 1 to Level 9 |
| Backlight Compensation | On/off with selectable areas |
| Digital Zoom | 4X |
| Auto Light Control | Level 1 to Level 8 |
| Image Rotation | Flip, Mirror, and 180° rotation |
| Image Setting | Manual tuning with saturation and sharpness |
| • Video | |
| Video Compression | H.264 (ISO/IEC 14496-10) or MJPEG |
| Video Outputs | Via Ethernet |
| Video Streams | Maximum of 3 video streams (2 x H.264, 1 x MJPEG) |
| Video Resolution and FPS (frames per second) |  |
| Video Viewing | • DynaStream™ supported for changing the video frame rate automatically • 8 privacy mask areas provided • Adjustable image size and quality • Timestamp and text overlay • Maximum of 10 simultaneous unicast connections |
| PTZ | Digital PTZ with 4X zoom |
| Audio Inputs | 1 line-in or mic-in with 2-pin terminal block connector |
| Audio Outputs | 1 line-out with 2-pin terminal block connector |
| • Network | |
| Protocols | TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS, Modbus/TCP, 802.1X, SSH, HTTPS |
| Ethernet | 1 10/100BaseT(X) Ethernet port, RJ45 connector |
| • GPIO | |
| Digital Input | 1, max. 8 mA Low: +13 V to +30 V; High: -30 V to +3 V |
| Relay Output | 1, max. 24 VDC @ 1A |
| • LED Indicators | |
| STAT | Indicates if the system is booted properly or not |
| Network | 10 Mbps or 100 Mbps |
| Power | Power on/off |
| DIP Switch | To turn the LED light on/off |
| • Local Storage | |
| SD Socket | Standard SD socket (SDHC) |
| • Power Requirements | |
| Power Input | • VPort 26: 1, 12/24 VDC or 24 VAC • VPort P26: Power-over-Ethernet (IEEE 802.3af) |
| Power Consumption | Max. 11.7 W |
| • Physical Characteristics | |
| Housing | Metal, IP66 rated for rain and dust protection |
| Dimensions | 149 mm (diameter) x 120 mm (height) |
| Installation | Surface mounting, or outdoor mounting with accessories |
| • Security | |
| Password | User level password protection |
| Filtering | By IP address |
| Authentication | 802.1X |
| Encryption | HTTPS, SSH |
| • Alarms | |
| Video Motion Detection | Includes sensitivity settings |
| Video Loss | Video loss alarm |
| Scheduling | Daily repeat timing schedule |
| Imaging | JPEG snapshots for pre/trigger/post alarm images |
| Email/FTP Messaging | Automatic transfer of stored images via email or FTP as event-triggered actions |
| Custom Alarms | HTTP event servers and CGI events for setting customized alarm actions |
| Pre-alarm Buffer | 24 MB video buffer for JPEG snapshot images |
| • Environmental Limits | |
| Operating Temperature | -40 to 50°C (-40 to 122°F ) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Standards and Certifications | |
| Safety | UL 60950-1 |
| EMI | FCC Part 15, CISPR (EN 55022) class A |
| EMS | EN 61000-4-2 (ESD), Level 3, EN 61000-4-3 (RS), Level 3, EN 61000-4-4 (EFT), Level 3, EN 61000-4-5 (Surge), Level 3, EN 61000-4-6 (CS), Level 3, EN 61000-4-8, EN 61000-4-11 |
| Shock | IEC60068-2-27 |
| Freefall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Vandal Resistance | EN 62262, IK10 level |
| • Warranty | |
| Warranty Period | 3 years |
| Details | See www.moxa.com/warranty |
| • Minimum Viewing System Requirements | |
| CPU | Pentium 4, 2.4 GHz |
| Memory | 512 MB of memory |
| OS | Windows XP/2000 with SP4 or above |
| Browser | Internet Explorer 6.x or above |
| Multimedia | DirectX 9.0c or above |
| • Software Development Kit | |
| VPort SDK PLUS | Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (the latest version of SDK is vailable for download from Moxa’s website). |
| Standard | ONVIF |
