MOXA Nport 5650-16

16-port RS-232/422/485 rackmount device server with RJ45 connectors and 100-240 VAC power input

With the NPort® 5600 rackmount series, you not only protect your current hardware investment, but also allow for future network expansion by centralizing the management of your serial devices and distributing management hosts over the network.

Network Readiness for up to 16 Serial Devices

Only basic configuration is needed with the NPort® 5600 to connect up to 16 serial devices to an Ethernet network.

19-inch Rackmount Device Server

NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and 8 or 16 RJ45 serial port connectors on the rear panel. This makes the NPort® 5600 device servers suitable for standard 19-inch rack mounting, allowing you to simplify operational, maintenance, and administrative tasks.

Real COM/TTY Ports

Real COM/TTY drivers are provided to make the serial ports on the NPort® 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.

LED Indicators to Ease Your Maintenance Tasks

The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks, and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.

Adjustable Termination and Pull High/Low Resistors

When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort® 5600 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.

Feature :

Features and Benefits

• 8 or 16 serial ports supporting RS-232/422/485
• Standard 19-inch rackmount size
• 10/100M auto-sensing Ethernet
• Built-in 15 KV ESD protection for all serial signals
• Easy IP address configuration with LCD panel (Not include wide temperature models)
• Choice of configuration methods: Web console, Telnet console, and Windows utility
• Versatile socket operation modes, including TCP Server, TCP Client, UDP, and Real COM
• SNMP MIB-II for network management
• Supports Moxa’s MXview industrial network management software via the MXview Plug-in

Diagram :

Specification :

• Ethernet Interface
Number of Ports	1
Speed	10/100 Mbps, auto MDI/MDIX
Connector	8-pin RJ45
Magnetic Isolation Protection	1.5 KV built-in
• Optical Fiber Interface
• Serial Interface
Number of Ports	8 or 16
Serial Standards	NPort 5610: RS-232 NPort 5630: RS-422/485 NPort 5650: RS-232/422/485
Connector	RJ45 (8 pins)
Serial Line Protection	15 KV ESD protection for all signals
RS-485 Data Direction Control	ADDC® (automatic data direction control)
Pull High/Low Resistor for RS-485	1 KΩ, 150 KΩ
• Serial Communication Parameters
Data Bits	5, 6, 7, 8
Stop Bits	1, 1.5, 2
Parity	None, Even, Odd, Space, Mark
Flow Control	DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate	50 bps to 921.6 Kbps
• Serial Signals
RS-232	TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422	Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w	Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w	Data+, Data-, GND
• Software
Network Protocols	ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, ARP, PPP, RTelnet, RFC2217
Configuration Options	Web Console, Telnet Console, Windows Utility
Windows Real COM Drivers	Windows 98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8 x86/x64, Windows 2012 X64
Fixed TTY Drivers	SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Linux Real TTY Drivers	Linux kernel 2.4.x, 2.6.x, 3.x
• Mini Screen with Push Buttons
LCD Panel	Liquid Crystal Display on the case
Push Buttons	Four push buttons for convenient on-site configuration
• Physical Characteristics
Housing	Metal, IP30 protection
Weight	NPort 5610-8: 3340 g NPort 5610-8-48V: 3160 g NPort 5630-8, 5650-8-S-SC, 5650-8-M-SC: 3380 g NPort 5650-8: 3360 g NPort 5610-16: 3420 g NPort 5610-16-48V: 3260 g NPort 5630-16: 3400 g NPort 5650-16: 3460 g NPort 5650-16-S-SC, 5650-16-M-SC: 3440 g
Dimensions	Without ears: 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in) With ears: 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in)
• Environmental Limits
Operating Temperature	Standare Models: 0 to 55°C (32 to 131°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 75°C (-40 to 167°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
• Power Requirements
Input Voltage	NPort 5610/5630/5650: 100 to 240 VAC, 47 to 63 hz NPort 5610-48V: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
Power Consumption	NPort 5610-8/16: 141 mA @ 100 VAC, 93 mA @ 240 VAC NPort 5630-8/16: 152 mA @ 100 VAC, 98 mA @ 240 VAC NPort 5610-8/16-48V: 135 mA @ 48 VDC NPort 5650-8/16: 158 mA @ 100 VAC, 102 mA @ 240 VAC NPort 5650-8/16-S-SC: 164 mA @ 100 VAC, 110 mA @ 240 VAC NPort 5650-8/16-M-SC: 174 mA @ 100 VAC, 113 mA @ 240 VAC
• Standards and Certifications
Safety	UL 60950-1, EN 60950-1
EMC	CE, FCC
EMI	EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS	EN 55024 (NPort 5610 only: IEC 61000-4-12)
Medical	EN 60601-1-2 Class B, EN 55011
• Reliability
Automatic Reboot Trigger	Built-in WDT (watchdog timer)
MTBF (mean time between failures)	NPort 5610-8: 97,294 hrs NPort 5610-16: 94,928 hrs NPort 5610-8-48V: 96,758 NPort 5610-16-48V: 94,417 hrs NPort 5630-8: 118,405 hrs NPort 5630-16: 91,483 hrs NPort 5650-8: 117,584 hrs NPort 5650-16: 104,767 hrs NPort 5650-S-SC-8: 116,914 hrs NPort 5650-S-SC-16: 87,528 hrs NPort 5650-M-SC-8: 116,914 hrs NPort 5650-M-SC-16: 87,528 hrs
• Warranty
Warranty Period	5 years
Details	See http://www.moxa.com/support/warranty.htm