MOXA ioLogik E2262

by | May 28, 2014 | Industrial ioLogik

ioLogik E2262

Ethernet Micro RTU Controller with 8 thermocouple inputs and 4 digital outputs

Moxa’s ioLogik E2200 is a new type of Ethernet micro RTU controller, which is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices. Unlike traditional RTUs, which are passive and must poll for data, Moxa’s ioLogik E2200 series with Active OPC Server makes seamless connection with SCADA systems a reality. In addition, SNMP is used for communicating with an NMS (Network Management System) for IT field users. The I/O status of an Ethernet micro RTU controller can be reported and controlled automatically on-site based on user specified conditions. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.

Actice Alarming with Local Intelligence

The ioLogik E2200 Micro RTU supports simple and powerful Click&Go™ technology to deliver event-driven reports and allow alarm messages to be sent by email, TCP/UDP, and SMNP Trap with real-time stamps. With built-in Click&Go™ intelligence, the ioLogik E2200 micro RTU can be used for simple output control when it is triggered by input status, without the need for a PC controller. The ioLogik E2200 micro RTU reports I/O status automatically based on user-specified conditions. This report by-exception approach requires far less bandwidth than the traditional polling approach.

Feature :

The Green Core Product Identity of the ioLogik series will be phased in starting May 1, 2014. During the product transition period, you may still receive products that use the previous panel design. Please click here to learn more about Moxa’s Green Core product transition.

Features and Benefits 

  • Active communication with patented Active OPC Server
  • Smart Alarm management with email, SNMP Trap, TCP, UDP
  • Supports SNMPv1/v2c/v3 protocol
  • Save time and wiring costs with peer-to-peer communication
  • Front-end intelligent with patented Click&Go control logic, up to 24 rules
  • Friendly configuration with web browser

Diagram :

Diagram ioLogik E2262

Specification :

ioLogik E2262 Specifications
• Inputs and Outputs
Thermocouple Inputs 8 channels
Digital Outputs 4 channels
• Thermocouple Input
Sensor Type J (0 to 750°C), K (-200 to 1250°C), T (-200 to 350°C), E (-200 to 900°C), R (-50 to 1600°C), S (-50 to 1760°C), B (600 to 1700°C), N (-200 to 1300°C)
Millivolt Type • Mode: ±78.126 mV, ±39.062 mV, ±19.532 mV
• Fault and over-voltage protection: -35 to +35 VDC (power off);
-25 to +30 VDC (power on)
Sampling Rate 12 samples/sec (all channels)
Resolution 16 bits
Accuracy ±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
±0.5% FSR @ -40 and 75°C
Input Impedance 1 M ohms
• Digital Output
Type Sink
I/O Mode DO or Pulse Output
Pulse Output Frequency 100 Hz
Over-voltage Protection 45 VDC
Over-current Protection 2.6 A (4 channels @ 650 mA)
Over-temperature Shutdown 175°C
Current Rating 200 mA per channel
Isolation 3k VDC or 2k Vrms
• Power Requirements
Power Consumption 160 mA @ 24 VDC
• MTBF (mean time between failures)
Time 341,063 hrs
Database Telcordia (Bellcore)
Common Specifications
• LAN
Ethernet 1 10/100 Mbps RJ45 port
Protection 1.5 kV magnetic isolation
Protocols Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, CGI, SNTP, SMTP
• Serial Communication
Interface RS-485-2w: Data+, Data-, GND (3-contact terminal block)
Serial Line Protection 15 kV ESD for all signals
• Serial Communication Parameters
Parity None
Data Bits 8
Stop Bits 1
Flow Control None
Baudrate 1200 to 115200 bps
Protocol Modbus/RTU
• Power Requirements
Power Input 24 VDC nominal, 12 to 36 VDC
• Physical Characteristics
Wiring I/O cable max. 14 AWG
Dimensions 115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
Weight under 250 g
Mounting DIN rail or wall
• Environmental Limits
Operating Temperature Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Altitude Up to 2000 m
Note Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
• Standards and Certifications
Safety UL 508
EMI EN 61000-3-2; EN 61000-3-3; EN 61000-6-4;
FCC Part 15, Subpart B, Class A
EMS EN 61000-4-2, EN 61000-4-3, EN 61000-4-4,
EN 61000-4-5, EN 61000-4-6, EN 61000-4-8,
EN 61000-4-11, EN 61000-6-2
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
Green Product RoHS, CRoHS, WEEE
Note Please check Moxa’s website for the most up-to-date certification status.
• Warranty
Warranty Period 5 years (excluding ioLogik E2214*)
Note *Because of the limited lifetime of power relays, products that use that component are covered by a 2-year warranty.
Details See www.moxa.com/warranty

Related Posts