Feature :
Features and Benefits
- LCD panel for easy IP address configuration (excluding wide temperature range models)
- Dual-LAN cards with two independent MAC addresses and IP addresses
- Redundant COM function available when both LANs are active
- Dual-host redundancy can be used to add a backup PC to your system
- Dual-AC-power inputs (for AC models only)
- Real COM/TTY drivers for Windows and Linux
- Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC
Overview
Redundancy is an important issue for industrial networks, and various types of solutions have been developed to provide alternative network paths when equipment or software failures occur. “Watchdog” hardware is installed to utilize redundant hardware-and a “Token”- switching software mechanism is applied. The CN2600 terminal server uses its built-in Dual-LAN ports to implement a “Redundant COM” mode that keeps your applications running uninterrupted.
Dual-LAN Redundancy
The CN2600 has two separate LAN ports that can be connected to separate LAN networks. Dual-LAN redundancy involves setting up two separate physical networks to connect the PC host with the CN2600 (the PC host also requires two LAN cards). If one connection fails, the PC host can still communicate with your serial devices over the alternative LAN connection.
Redundant COM
Moxa offers “Redundant COM”, an easy-to-use application to provide an alternative solution for network redundancy. When the CN2600 receives a data packet from a connected device, two identical data packets are sent over two independent LAN connections to prevent lost data packets if one LAN connection becomes unavailable. The CN2600 software is programmed to automatically discard duplicate data packets.
Dual-host Redundancy
The CN2600’s dual LAN cards can also be used to set up “dual-host” redundancy. In this case, both networks (LAN A and LAN B in the figure) are connected to two different hosts. If either of the two hosts shuts down unexpectedly, the other host will still be able to communicate with serial devices connected to the CN2600.
Dual-AC Model Supported
Dual-power redundancy uses two power inputs and redundant internal power supplies to ensure that all of the CN2600’s functions will be available, even in the event of power circuit failures.
• Ethernet Interface | |
Number of Ports | 2 (2 IPs) |
Speed | 10/100 Mbps, auto MDI/MDIX |
Connector | 8-pin RJ45 |
Magnetic Isolation | 1.5 kV built-in |
• Serial Interface | |
Number of Ports | 8 or 16 |
Serial Standards | CN2610: RS-232 CN2650/2650I: RS-232/422/485 |
Connector | CN2610/2650: 8-pin RJ45 CN2650I: DB9 male |
Serial Line Protection | 2 kV optical isolation (CN2650I) |
RS-485 Data Direction Control | ADDC® (Automatic Data Direction Control) |
Console Port | Dedicated RS-232 console port on rear panel (8-pin RJ45) |
• Serial Communication Parameters | |
Data Bits | 5, 6, 7, 8 |
Stop Bits | 1, 1.5, 2 |
Parity | None, Even, Odd, Space, Mark |
Flow Control | RTS/CTS, DTR/DSR, XON/XOFF |
Baudrate | 50 bps to 921.6 kbps |
Pull High/Low Resistor for RS-485 | 1 kΩ, 150 kΩ |
Terminator for RS-485 | 120 Ω |
• Serial Signals | |
RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
RS-485-2w | Data+, Data-, GND |
• Software | |
Network Protocols | ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP, HTTP, SMTP, ARP, PPPoE, DDNS |
Security Protocols | RADIUS, HTTPS, SSH, PAP, CHAP |
Configuration Options | Web Console, Serial Console, Telnet Console, Windows Utility |
Windows Real COM Drivers | Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded |
Fixed TTY Drivers | SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X |
Linux Real TTY Drivers | Linux 2.4.x, 2.6.x, 3.x |
Management | SNMP MIB-II |
IP Routing | Static, RIP-I, RIP-II |
• Operation Modes | |
Standard | Real COM, TCP Server, TCP Client, UDP, RFC2217, Terminal, Reverse Telnet, PPP, DRDAS, Redundant COM, Disabled |
• Applications | |
Terminal Sessions | 8 sessions per port |
• Physical Characteristics | |
Housing | Metal |
Weight | CN2610-8-2AC: 3,760 g (8.29 lb) CN2610-16-2AC: 3,980 g (8.77 lb) CN2650-8: 3,740 g (8.25 lb) CN2650-16: 3,790 g (8.36 lb) CN2650-8-2AC: 3,900 g (8.60 lb) CN2650-16-2AC: 3,980 g (8.77 lb) CN2650I-8: 3,666 g (8.08 lb) CN2650I-16: 3,776 g (8.32 lb) CN |
Dimensions | Without ears: 440 x 198 x 45.5 mm (17.32 x 7.80 x 1.77 in) With ears: 480 x 198 x 45.5 mm (18.9 x 7.80 x 1.77 in) |
• Environmental Limits | |
Operating Temperature | Standard Models: 0 to 55°C (32 to 131°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) High-Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
Storage Temperature | Standard Models: -40 to 75°C (-40 to 167°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) High-Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
• Power Requirements | |
Input Voltage | AC Models: 100 to 240 VAC, 47 to 63 Hz DC Models: 110 VDC (88 to 300 VDC) |
Input Current | CN2600 AC models: 325 mA @ 100 VAC, 47 to 64 Hz CN2650I HV models: 200 mA @ 88 VDC |
• Standards and Certifications | |
Safety | UL 60950-1 |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | AC models: IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2.5 kV; Signal: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m |
Freefall | IEC-68-2-34, IEC-68-2-32 |
Vibration | IEC-68-2-6 |
Green Product | RoHS, CRoHS, WEEE |
• Reliability | |
Alert Tools | Built-in buzzer and RTC (real-time clock) |
Automatic Reboot Trigger | Built-in WDT (watchdog timer) |
• MTBF (mean time between failures) | |
Time | CN2610-8-2AC: 124,859 hrs CN2610-16-2AC: 105,915 hrs CN2650-8 series: 457,140 hrs CN2650-16 series: 375,472 hrs CN2650I-8 series: 190,562 hrs CN2650I-16 series: 115,887 hrs CN2650I-8-HV-T: 191,326 hrs CN2650I-16-HV-T: 116,924 hrs |
Standard | CN2610-8-2AC, CN2610-16-2AC: MIL-HDBK-217F CN2650-8/16, CN2650I-8/16, CN2650I-8/16-HV-T: Telcordia (Bellcore) Standard TR/SR |
• Warranty | |
Warranty Period | 5 years |
Details | See www.moxa.com/warranty |