AWK-5222-EUIndustrial IEEE 802.11a/b/g Dual-Radio Wireless AP/Bridge/Client

Moxa’s wireless redundancy technology allows you to set up independent wireless connections to avoid interruptions in transmission, even if interference occurs on one of the supported frequencies. The AWK-5222 is equipped with the newest proprietary wireless redundancy technology, which has two independent RF modules, and supports a greater variety of wireless configurations and applications. The redundant wireless connections increase the reliability of the entire wireless network. The AWK-5222 is compliant with the industrial standards and approvals, covering operating temperature, power input voltage, surge, ESD and vibration. The AWK-5222 is rugged enough to help you establish the most robust wireless connection for critical industrial wireless applications.

Redundancy to Increase System Reliability 

  • Dual DC power inputs and PoE
  • Dual-radio design with 2.4 and/or 5 GHz dual-band operation for redundant WLAN connections
  • Redundant roaming for fast and stable handoff
  • Ethernet redundancy via RSTP

Specifications for Industrial-grade Applications 

  • Industrial-grade QoS and VLAN for efficient data traffic management
  • Long-distance wireless transmission over 10 km
  • Integrated DI/DO for on-site monitoring and warnings
  • Signal strength LEDs for easy deployment and antenna alignment

Feature :

Features and Benefits 

  • IEEE 802.11a/b/g compliant
  • Dual-radio design for 2.4 GHz and/or 5 GHz RF bands
  • Supports client-based Turbo Roaming and redundant roaming
  • -40 to 75°C operating temperature range (T models)

Specification :

• WLAN Interface
Standards IEEE 802.11a/b/g for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT(X)
IEEE 802.3u for 100BaseT(X)
IEEE 802.3af for Power-over-Ethernet
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN
Spread Spectrum and Modulation (typical) • DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
64QAM @ 54 Mbps, 16QAM @ 24/36 Mbps, QPSK @ 12/18 Mbps, CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBSK@ 1 Mbps
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,
DBPSK @ 11 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps,
QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
Operating Channels (central frequency) US:
2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
JP:
2.412 to 2.472 GHz (13 channels, OFDM)
2.412 to 2.484 GHz (14 channels, DSSS)
5.18 to 5.24 GHz (4 channels for W52)
Security • SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port-based filtering
• 64-bit and 128-bit WEP encryption, WPA /WPA2 Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates 802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
TX Transmit Power 802.11b:
Typ. 23±1.5 dBm @ 1 to 11 Mbps
802.11g:
Typ. 20±1.5 dBm @ 6 to 24 Mbps, Typ. 19±1.5 dBm @ 36 Mbps, Typ. 18±1.5 dBm @ 48 Mbps, Typ. 17±1.5 dBm @ 54 Mbps
802.11a:
Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 36 to 48 Mbps, Typ. 15±1.5 dBm @ 54 Mbps
RX Sensitivity 802.11b:
-97 dBm @ 1 Mbps, -94 dBm @ 2 Mbps, -92 dBm @ 5.5 Mbps, -90 dBm @ 11 Mbps
802.11g:
-93 dBm @ 6 Mbps, -91 dBm @ 9 Mbps, -90 dBm @ 12 Mbps, -88 dBm @ 18 Mbps, -84 dBm @ 24 Mbps, -80 dBm @ 36 Mbps, -76 dBm @ 48 Mbps, -74 dBm @ 54 Mbps
802.11a:
-90 dBm @ 6 Mbps, -89 dBm @ 9 Mbps, -89 dBm @ 12 Mbps, -85 dBm @ 18 Mbps, -83 dBm @ 24 Mbps, -79 dBm @ 36 Mbps, -75 dBm @ 48 Mbps, -74 dBm @ 54 Mbps
• Protocol Support
General Protocols Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, DHCP
AP-only Protocols ARP, BOOTP, DHCP, STP/RSTP (IEEE 802.1D/w)
• Interface
Default Antennas 2 dual-band omni-directional antennas, 2 dBi, RP-SMA (male)
Connector for External Antennas RP-SMA (female)
RJ45 Ports: 2, 10/100BaseT(X), auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
Console Port RS-232 (RJ45-type)
Reset Present
LED Indicators PWR1, PWR2, PoE, FAULT, STATE, WLAN1, WLAN2, 10M, 100M
Alarm Contact (digital output) 1 relay output with current carrying capacity of 1 A @ 24 VDC
Digital Inputs 2 electrically isolated inputs
• +13 to +30 V for state “1”
• +3 to -30 V for state “0”
• Max. input current: 8 mA
• Physical Characteristics
Housing Metal, IP30 protection
Weight 1.1 kg
Dimensions 62 x 135 x 105 mm (2.4 x 5.3 x 4.1 in)
Installation DIN-Rail mounting (standard), Wall mounting (optional)
• Environmental Limits
Operating Temperature Standard Models: -25 to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5% to 95% (non-condensing)
• Power Requirements
Input Voltage 12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet (IEEE 802.3af compliant)
Connector 10-pin removable terminal block
Power Consumption 12 to 48 VDC, 800 mA (max.)
Reverse Polarity Protection Present
• Standards and Certifications
Safety UL 60950-1, EN 60950-1
EMC EN 301 489-1/17, FCC Part 15 Subpart B, EN 55022/55024,
IEC 61000-6-2/4
Radio EN 300 328, EN 301 893
Note Please check Moxa’s website for the most up-to-date certification status.
• Reliability
MTBF (mean time between failures) 291,367 hrs
• Warranty
Warranty Period 5 years
Details See www.moxa.com/warranty