For environmental monitoring and management, ATEN provides sensor probes that work in tandem with the Power Distribution Units, which enable you to get readings of Differential Pressure & Temperature. Environmental conditions can be monitored with alarms according to customizable minimum/maximum thresholds set for temperature and humidity.
The Sensor is an optional accessory and you can use the ATEN PDU without environmental sensors. However, if you want to have complete energy management of your data center with the full use of ATEN solutions, a sensor installation is required.
Feature :
- Measurement range: -19-60°C (Temperature); +-500 Pa (Pressure )
- Compact design – built in 3 m cable
- High sensitivity
- Easy operation
Diagram :
Specification :
| Connectors | RJ11-4P4C | |
| Measurement Range | Pressure | +-500 Pa |
| Temperature | -19-60°C | |
| Resolution | Pressure | 0.3 Pa |
| Temperature | 0.1°C | |
| Accuracy | Pressure | +-1 % ,(15-35°C) |
| T.C | -0.1 Pa/ °C | |
| Temperature | +-1°C (0-40°C) | |
| Unit | Pressure | Pa |
| Temperature | °C | |
| Power Consumption | DC 5V(max.), 3mA(typical) | |
| Environment | Operating Temp. | 0-60°C, <95%RH non condense |
| Storage Temp. | Recommend 0-40°C | |
| Humidity | < 90% RH | |
| Physical Properties |
Housing | Plastic |
| Weight | 0.09 kg | |
| Cable Length | 3m | |
- The specification and pictures are subject to change without notice.
- All trademarks and logos are the properties of their respective holders.
