Industrial 8-port Unmanaged Ethernet Switch
Overview
IES-1080/1062 series are unmanaged Ethernet switches with 6×10/100Base-T(X) and 2x100Base-FX, 10/100/1000Base-T(X), 1000Base-SX or 1000Base- LX ports. IES-1080/1062 series support redundant power input, relay output alarm, and surge protection. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environments.
Features
-
- IES-1080 provide 8×10/100Base-T(X) ports
- IES-1062GT provide 6×10/100Base-T(X) and 2×10/100/1000Base-T(X) ports
- IES-1062FX series provide 6×10/100Base-T(X) and 2x100Base-FX fiber ports
- IES-1062GF series provide 6×10/100Base-T(X) and 2x1000Base-X fiber ports
- Triple redundant DC power inputs of terminal block and power jack
- Support auto-negotiation and auto-MDI/MDI-X
- Support store and forw ard transmission
- Support flow control
- Warning system by relay output
- Rigid IP-30 housing design
- DIN-Rail and wall mounting enabled
| Specification |
 Specifications |
| ORing Switch Model |
IES -1062GF-MM-SC |
IES -1062GF-SS-SC |
| Physical Ports |
|
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX |
6 |
6 |
| Fiber Ports Number |
2 |
2 |
| Fiber Ports Standard |
1000Base-SX |
1000Base-LX |
| Fiber Mode |
Multi-mode |
Single-mode |
| Fiber Diameter (μm) |
62.5/125 μm
50/125 μm |
9/125 μm |
| Fiber Optical Connector |
SC |
SC |
| Fiber Ports Specifications Typical Distance (km) |
0.55 km |
10 km |
| Wavelength (nm) |
850 nm |
1310 nm |
| Max. Output Optical Power (dBm) |
-4 dBm |
-3 dBm |
| Min. Output Optical Power (dBm) |
-9.5 dBm |
-9.5 dBm |
| Max. Input Optical Power(Saturation) |
0 dBm |
-3 dBm |
| Min. Input Optical Power (Sensitivity) |
-18 dBm |
-20 dBm |
| Link Budget (dB) |
8.5 dB |
10.5 dB |
| Technology |
|
|
| Ethernet Standards |
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control |
| MAC Table |
8192 MAC addresses |
| Processing |
Store-and-Forward |
| LED Indicators |
|
| Power Indicator |
Green : Power LED x 3 |
| Fault Indicator |
Amber : Indicates PWR1 or PWR2 failure occurred |
| 10/100Base-FX RJ45 Port Indicator |
Green for port Link/Act. Amber for Duplex/Collision |
| 10/100/1000Base-T(X) / Fiber Port Indicator |
Green for port Link/Act. Amber for Link |
| Fault contact |
|
| Relay |
Relay output to carry capacity of 1A at 24VDC |
| Power |
|
| Redundant Input Power |
Triple DC inputs. 12~48VDC on 7-pin terminal block, 12~45VDC on power jack |
| Power Consumption (Typ.) |
6 watts |
6 watts |
| Overload Current Protection |
Present |
| Reverse Polarity Protection |
Present on terminal block |
| Physical Characteristics |
|
| Enclosure |
IP-30 |
| Dimensions (W x D x H) |
52(W) x 106.1(D) x 144.3(H) mm (2.05×4.18×5.68 inch.) |
| Weight (g) |
685 g |
685 g |
| Environmental |
|
|
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Operating Temperature |
-40 to 70°C (-40 to 158°F) |
| Operating Humidity |
5% to 95% Non-condensing |
|
| Regulatory Approvals |
|
| EMI |
FCC Part 15, CISPR (EN55022) class A, |
| EMS |
IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 |
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-32 |
| Vibration |
IEC60068-2-6 |
| Safety |
EN60950-1, UL508(E331061) |
| MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) |
370,965 |
370,965 |
| Warranty |
5 years |
|
