ORing’s TransporterTM series managed PoE Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. TGPS-9164GT-M12 is managed Redundant Ring Ethernet switch with 16×10/100Base-T(X) P.S.E. and 4×10/100/1000Base-T(X) ports which is specifically designed for the toughest and fully compliant with EN50155 requirement. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection), Open-Ring, O-Chain, MRP and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. TGPS-9164GT-M12 also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each TGPS-9164GT-M12 switch has 16×10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. TGPS-9164GT-M12-BP2 includes 2 sets of bypass ports that protect the network from failures and Network maintenance by ensuring network integrity during power loss. And support wide operating temperature from -40 oC to 70 oC. TGPS-9164GT-M12 can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices for EN50155 highly-managed Ethernet application.
Feature :
- Leading EN50155-compliant Ethernet switch for rolling stock application
- Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
- Open-Ring support the other vendor’s ring technology in open architecture
- O-Chain allow multiple redundant network rings
- Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
- Supports IEEE 802.3at compliant PoE and total power budget is 240Watts (-24V model) / 480Watts with maximum 30Watts per port
- Support PoE scheduled configuration and PoE auto-ping check function
- Support IEEE 1588v2 clock synchronization
- Support IPV6 new internet protocol version
- Support Modbus TCP protocol
- Support IEEE 802.3az Energy-Efficient Ethernet technology
- Provided HTTPS/SSH protocol to enhance network security
- Support SMTP client
- Support IP-based bandwidth management
- Support application-based QoS management
- Support Device Binding security function
- Support DOS/DDOS auto prevention
- IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
- Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
- Support ACL, TACACS+ and 802.1x User Authentication for security
- Supports 9.6K Bytes Jumbo Frame
- Multiple notification for warning of unexpected event
- Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
- Support LLDP Protocol
- Provided 2xRelay bypass function with four gigabit ports (-BP2 model)
- Wall mounting enabled
Specification :
| ORing Switch Model | TGPS-9164GT-M12 | TGPS-9164GT-M12-24V | TGPS-9164GT-M12-BP2 | TGPS-9164GT-M12-BP2-24V | |
| Physical Ports | |||||
| 10/100/1000Base-T(X) with P.S.E. Ports in RJ45 Auto MDI/MDIX | 16 (8-Pin A-coding) | ||||
| 10/100/1000Base-T(X) ports in M12 Auto MDI/MDIX | 4 (8-Pin A-coding) | 4 (8-pin A-coding with 2 x bypass function included) | |||
| Technology | |||||
| Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) IEEE 802.3at PoE specification |
||||
| MAC Table | 8k | ||||
| Processing | Store-and-Forward | ||||
| Priority Queues | 8 | ||||
| Switch Properties | Switching latency: 7 us Switching bandwidth: 40Gbps Max. Number of Available VLANs: 256 IGMP multicast groups: 128 for each VLAN Port rate limiting: User Define |
||||
| Security Features | Device Binding security feature Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security Https / SSH enhance network security |
||||
| Jumbo frame | Up to 9.6K Bytes | ||||
| Software Features | STP/RSTP/MSTP (IEEE 802.1D/w/s) Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging and GVRP supported IGMP Snooping IP-based bandwidth management Application-based QoS management DOS/DDOS auto prevention Port configuration, status, statistics, monitoring, security DHCP Server/Client/Relay SMTP Client Modbus TCP |
||||
| Network Redundancy | O-Ring Open-Ring O-Chain MRP MSTP(RSTP/STP compatible) |
||||
| RS-232 Serial Console Port | RS-232 in 5-pin M12 connector with console cable. 115200bps, 8, N, 1 | ||||
| LED Indicators | |||||
| Power Indicator | Green : Power LED x 2 | ||||
| Ring Master Indicator (R.M.) | Green : Indicates that the system is operating in O-Ring Master mode | ||||
| O-Ring Indicator (Ring) | Green : Indicates that the system operating in O-Ring mode Green Blinking : Indicates that the Ring is broken. |
||||
| Fault Indicator (Fault) | Amber : Indicate unexpected event occurred | ||||
| 10/100/1000Base-T(X) M12 P.S.E. | Top Green LED for port Link/Act indicator. | ||||
| 10/100/1000Base-T(X) M12 Port Indicator |
Top Green LED for Link/Act indicator Bottom dual color LED for Ethernet speed indicator : Green LED for 1000Mbps, Amber for 100Mbps |
||||
| PoE Indicator | Middle Green LED for PoE enable indicator Bottom dual color LED for Ethernet speed indicator : Green LED for 1000Mbps, Amber for 100Mbps |
||||
| Fault contact | |||||
| Relay | Relay output to carry capacity of 3A at 24VDC on M12 connector (A-coding) | ||||
| Power | |||||
| Redundant Input power | Dual DC inputs. 50~57VDC on 5-pin M23 connector | Dual DC inputs. 24 (12~57VDC) VDC on 5-pin M23 connector | Dual DC inputs. 50~57VDC on 5-pin M23 connector | Dual DC inputs. 24 (12~57VDC) VDC on 5-pin M23 connector | |
| Total PoE Output Power | 480 Watts | 120 Watts (12~24VDC) / 240 Watts (24~57VDC) | 480 Watts | 120 Watts (12~24VDC) / 240 Watts (24~57VDC) | |
| Power Consumption (Type.) | 20 Watts (power consumption of P.S.E. is not included) | 25 Watts (power consumption of P.S.E. is not included) | 20 Watts (power consumption of P.S.E. is not included) | 25 Watts (power consumption of P.S.E. is not included) | |
| Overload current protection | Present | ||||
| Reverse Polarity Protection | Not Present | ||||
| Physical Characteristic | |||||
| Enclosure | IP-30 | ||||
| Dimension (W x D x H) | 260 (W) x 91.3 (D) x216 (H) mm | ||||
| Weight (g) | 2528 g | 2553 g | 2550 g | 2575 g | |
| Environmental | |||||
| Storage Temperature | -40 to 85°C (-40 to 185°F) | ||||
| Operating Temperature | -40 to 70°C (-40 to 158°F) | ||||
| Operating Humidity | 5% to 95% Non-condensing | ||||
| Regulatory approvals | |||||
| EMI | FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) | ||||
| EMS | EN61000-4-2 (ESD) EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
||||
| Shock | IEC60068-2-27 | ||||
| Free Fall | IEC60068-2-31 | ||||
| Vibration | IEC60068-2-6 | ||||
| Safety | EN60950-1 | ||||
| Warranty | 5 years | ||||
Related Posts
SFP1G-LHX40-I 1Gbps SFP optical transceiver, single-mode / 40km, 1310nm, industrial grade
ATEN 2L-7DA6H
TRENDNET TU3-H4E
MOXA M-1800
ATEN CS62AZ PS/2 Cable KVM
ATEN UC3238
Oring IDS-M311 Industrial 1-port Modbus Gateway with 1xRS-232/422/485 and 1×10/100 Base-T(X)
ATEN KA9520 PS/2 KVM Adapter Cable (CPU Module)