Oring IDS-M311 Industrial 1-port Modbus Gateway with 1xRS-232/422/485 and 1×10/100 Base-T(X)

by | Jun 19, 2015 | ORing

Oring IDS-M311IDS-M311 is an innovative 1-port Modbus Gateway which converts between Modbus TCP and Modbus RTU/ASCII. IDS-M311 is mainly designed for easy integration of Modbus RTU/ASCII devices and network based Modbus TCP devices without changing currently existed structure. While IDS-M311 is able to support up to 31 RTU/ASCII devices in its serial port, thus this model can effectively connect a high density of Modbus nodes to the same network. In addition, the Web Configuration Interface could configure multiple devices and set up IDS-M311 operation mode for different application requirement. IDS-M311 allows user to select from master or slave mode for user to access Ethernet slave devices or Serial slave devices.

IDS-M311 supports RS-232/422/485 and provides dual redundant power inputs, 12~48 VDC, on DC power jack and terminal block to guarantee a non-stop operation.  With wide operating temperature, -10~60oC, and rugged IP-30 housing design, IDS-M311 could operate in the harsh industrial environment. Therefore, IDS-M311 is the best solution to the high demand of secure serial to Ethernet critical data communication.

Feature :

  • Operating Modes: RTU Master, RTU Slave, ASCII Master, ASCII Slave
  • Supports up to 16 TCP connections and 32 requests simultaneously
  • Convert between Modbus TCP and Modbus RTU/ASCII
  • Provides 1xRS-232/422/485 software selectable serial communication
  • Internet Communication: PPPoE
  • Update DNS Hostname: DDNS
  • Event Warning by Syslog, Email, SNMP trap, and Beeper
  • Dual DC power inputs
  • Configurable by Web Interface
  • Various Windows O.S. supported: Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/ Windows 7(32/64bit)
  • DIN-rail and Wall mount enabled

Specification :

ORing Device Server Model IDS-M311
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
Serial Ports
Connector DB9(male) x 1
Operation Mode RS232 / RS422 / 4(2)-Wire RS485.  Which can be configured by Web interface
Serial Baud Rate 110bps to 460.8kbps
Data Bit 5, 6, 7, 8
Stop Bit 1, 1.5, 2
Parity odd, even, none, mark, space
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS-422 Tx+,Tx-, Rx+, Rx-,GND
RS-485(4-Wire) Tx+,Tx-, Rx+, Rx-,GND
RS-482(2-wire) Data+, Data-,GND
Flow Control XON/XOFF, RTS/CTS, DTR/DSR
Network Features
Network Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, PPPoE, DDNS
LED Indicators
Power Indicator PWR 1(2) / Ready:
Red On : Power is on and booting up.
Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly.
Green On : Power is on and functioning Normally.
Green Blinking : Located by Administrator.
10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps.
Serial TX / RX LEDs Red : Serial port is receiving data
Green : Serial port is transmitting data
Power
Redundant Input Power Dual DC inputs. 12-48VDC on 3-pin terminal block and power jack
Power Consumption (Typ.) 4 watts
Overload Current Protection Present
Reverse Polarity Protection Present on terminal block
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 72(W)x29.4(D)x123.4(H) mm (2.83×1.16×4.86 inch.)
Weight (g) 294 g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -10 to 60°C (14 to 140°F)
Operating Humidity 5% to 95% Non-condensin
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A,
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

Related Posts