Oring TAR-120-M12 Industrial EN50155 IEEE 802.11 b/g Cellular VPN Router with 2×10/100Base- T(X), M12 connector, Cellular modem included

by | May 8, 2015 | ORing, Transpoter Wirelles Product

Oring TAR-120-M12 ORing’s Transporter series cellular VPN router is designed for industrial and rolling stock wireless applications, such as vehicle, and railway applications. TAR-120-M12 is reliable IEEE802.11 b/g router with 2 ports LAN which is fully compliant with EN50155 certification. It supports 802.1X and MAC filter for security control. It can be configured to operate in 3 modes of routing function: Dynamic/Static IP route, PPPoE authentication, and Cellular Modem dialup. Users can set up WLAN environment to fulfill demands of various applications rapidly by dialing up cellular modem. TAR-120-M12 EN50155 cellular VPN router use M-series connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. TAR-120-M12 provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports. Therefore, TAR-120-M12 is one of the most reliable choices for rolling stock applications on the wireless network.

Feature :

  • Leading EN50155-compliant wireless cellular VPN router for rolling stock applications
  • High Speed Air Connectivity: WLAN interface supports up to 54Mbps link speed
  • Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2 PSK(TKIP,AES)/802.1X Authentication supported
  • Secured Management by HTTPs
  • Various kind of WAN Connection Type supported: Dynamic/Static IP, PPPoE, Modem dial-up
  • IP table configurable to prevent access from unauthorized IP address
  • Supports VPN for secured network connection (Open VPN , PPTP VPN)
  • Supports NAT Setting (Virtual Server , Port Trigger , DMZ , UPnP)
  • Supports DHCP forwarding through PPTP function
  • 3.5G HSDPA Modem dial-up included
  • Dual redundant Ethernet ports support Ethernet redundant mode (Recovery time < 10ms) and switch mode in M12 connector (D-coding)
  • Wireless connecting status monitoring
  • Event Warning by Syslog, Email, SNMP Trap and Relay output
  • Ultra-rugged enclosure for toughest industrial usages
  • Wall mounting enabled

Specification :

ORing EN50155 WLAN Access Point Router Model TAR-120-M12
Physical Ports
10/100Base-T(X) Port in M12 Auto MDI/MDIX 2 (4-pin M12 connector – D-coding)
Sim Card Slot 1
Relay Output on M12(D-Coding) connector 1
WLAN Feature
WAN Connection Type Static/Dynamic IP, PPPoE ,3G Modem dial-up
Antenna and Connector 2 x 2 dBi (b/g mode) on Reverse SMA connector
1 x 2 dBi (Cellular modem) on Reverse SMA connector
Radio Frequency Type DSSS, OFDM
Modulation IEEE802.11b: CCK, DQPSK, DBPSK
IEEE802.11g: OFDM with BPSK, QPSK, 16QAM, 64QAM
Frequency Band America / FCC: 2.412~2.462 GHz (11 channels)
Europe CE / ETSI: 2.412~2.472 Ghz (13 channels)
Transmission Rate IEEE802.11b: 1 / 2 / 5.5 / 11 Mbps
IEEE802.11g: 6 / 9 / 12 / 18 / 24 / 36 / 48 / 54 Mbps
Transmit Power IEEE802.11b/g: 20dBm max
Receiver Sensitivity -81dBm @ 11Mbps, PER< 8%;
-64dBm @ 54Mbps, PER< 10%
Encryption Security WEP: (64-bit ,128-bit key supported)
WPA/WPA2 :802.11i(WEP and AES encryption)
WPA-PSK (256-bit key pre-shared key supported)
802.1X Authentication supported
TKIP encryption
Wireless Security SSID broadcast disable
Cellular Interface
Cellualr Standard GSM / GPRS/ EGPRS/ EDGE / WCDMA / HSDPA / HSUPA
Band Option Dual-band : HSUPA 1900/2100 MHz
Quad-band : GSM/GPRS/EDGE 850/900/1800/1900 MHz
WCDMA/HSDPA 850/900/1900/2100 MHz
Protocol Support
Protocol ARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, STP (IEEE 802.1D)
LED Indicators
Power Indicator 2 x LEDs, Green for Power indicator
10/100Base-T(X) Port Indicator 2 x LEDs, Green for port Link/ Act at 100Mbps. Amber for port Link/ Act at 10Mbps
WLAN LED 1 x LEDs, Green for WLAN 1 Link/ Act. Red for WLAN 2 Link/ Act
WAN LED 1 x LED, Green for Cellular modem Link/ Act
Fault Indicator 1 x LED, Red for Ethernet link down or power down indicator
Fault Contact
Relay Relay output to carry capacity of 3A at 24VDC
Power
Input Power Dual Power Inputs. 12~48 VDC on M23 connector (24 VDC Typ.)
Power Consumption (Typ.) 5.8W
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristics
Enclosure IP-40
Dimensions (W x D x H) 125(W) x 65(D) x 196(H) mm (4.92 x 2.56 x 7.72 inch.)
Weight (g) 950g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -20 to 70°C (-4 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2)
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27 , EN61373
Free Fall IEC60068-2-32
Vibration IEC60068-2-6 , EN61373
Cooling EN60068-2-1
Dry Heat EN60068-2-2
Safety EN60950-1
Warranty 3 years

Related Posts