IES-1080/1062 series are unmanaged Ethernet switches with 6×10/100Base-T(X) and 2x100Base-FX, 10/100/1000Base-T(X), 1000Base-SX or 1000Base- LX ports. IES-1080/1062 series support redundant power input, relay output alarm, and surge protection. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environments.
Feature :
- IES-1080 provide 8×10/100Base-T(X) ports
- IES-1062GT provide 6×10/100Base-T(X) and 2×10/100/1000Base-T(X) ports
- IES-1062FX series provide 6×10/100Base-T(X) and 2x100Base-FX fiber ports
- IES-1062GF series provide 6×10/100Base-T(X) and 2x1000Base-X fiber ports
- Triple redundant DC power inputs of terminal block and power jack
- Support auto-negotiation and auto-MDI/MDI-X
- Support store and forw ard transmission
- Support flow control
- Warning system by relay output
- Rigid IP-30 housing design
- DIN-Rail and wall mounting enabled
Specification :
ORing Switch Model | IES-1062FX-MM-SC | IES -1062FX-SS-SC | |
Physical Ports | |||
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX | 6 | 6 | |
Fiber Ports Number | 2 | 2 | |
Fiber Ports Standard | 100Base-FX | 100Base-FX | |
Fiber Mode | Multi-mode | Single-mode | |
Fiber Diameter (μm) | 62.5/125 μm 50/125 μm |
9/125 μm | |
Fiber Optical Connector | SC | SC | |
Fiber Ports Specifications Typical Distance (km) | 2 km | 30 km | |
Wavelength (nm) | 1310 nm | 1310 nm | |
Max. Output Optical Power (dBm) | -14 dBm | -8 dBm | |
Min. Output Optical Power (dBm) | -23.5 dBm | -15 dBm | |
Max. Input Optical Power(Saturation) | 0 dBm | 0 dBm | |
Min. Input Optical Power (Sensitivity) | -31 dBm | -34 dBm | |
Link Budget (dB) | 7.5 dB | 19 dB | |
Technology | |||
Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000Base-X IEEE 802.3x for Flow control |
||
MAC Table | 8192 MAC addresses | ||
Processing | Store-and-Forward | ||
LED Indicators | |||
Power Indicator | Green : Power LED x 3 | ||
Fault Indicator | Amber : Indicates PWR1 or PWR2 failure occurred | ||
10/100Base-FX RJ45 Port Indicator | Green for port Link/Act. Amber for Duplex/Collision | ||
10/100/1000Base-T(X) / Fiber Port Indicator | Green for port Link/Act. Amber for Link | ||
Fault contact | |||
Relay | Relay output to carry capacity of 1A at 24VDC | ||
Power | |||
Redundant Input Power | Triple DC inputs. 12~48VDC on 7-pin terminal block, 12~45VDC on power jack | ||
Power Consumption (Typ.) | 8 watts | 8 watts | |
Overload Current Protection | Present | ||
Reverse Polarity Protection | Present on terminal block | ||
Physical Characteristics | |||
Enclosure | IP-30 | ||
Dimensions (W x D x H) | 52(W) x 106.1(D) x 144.3(H) mm (2.05×4.18×5.68 inch.) | ||
Weight (g) | 680 g | 680 g | |
Environmental | |||
Storage Temperature | -40 to 85°C (-40 to 185°F) | ||
Operating Temperature | -40 to 70°C (-40 to 158°F) | ||
Operating Humidity | 5% to 95% Non-condensing | ||
Regulatory Approvals | |||
EMI | FCC Part 15, CISPR (EN55022) class A, | ||
EMS | IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 | ||
Shock | IEC60068-2-27 | ||
Free Fall | IEC60068-2-32 | ||
Vibration | IEC60068-2-6 | ||
Safety | EN60950-1, UL508(E331061) | ||
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) | 354,989 | 354,989 | |
Warranty | 5 years |