ORing’s TransporterTM series un-managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TGPS-1080-M12 is an un-managed PoE Ethernet switch with 8×10/100/1000Base-T(X) P.S.E., which is specifically designed for the toughest and fully compliant with EN50155 requirement. TGPS-1080-M12 also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each TGPS-1080-M12 switch has 8X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. TGPS-1080-M12 EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed PoE Ethernet application.
Feature :
- Leading EN50155-compliant Ethernet switch for rolling stock application
- Provide 8×10/100/1000Base-T(X) PoE (P.S.E.) ports
- Supports IEEE 802.3at compliant PoE with maximum 30Watts per port
- Support dual power inputs for power redundancy
- Support auto-negotiation and auto-MDI/MDI-X
- Support store and forward transmission
- Support flow control
- M12 connectors to guarantee reliable operation against environmental disturbances
- Rigid IP-40 housing design
- Wall mounting enabled
Specification :
Specifications | ||
ORing Switch Model | TGPS-1080-M12-24V | TGPS-1080-M12 |
Physical Ports | ||
10/100/1000Base-T(X) Ports in M12 With P.S.E. | 8 x M12 connector (8-pin A-coding) | |
Technology | ||
Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow control IEEE 802.3at compliant PoE specification (total power budget is 120Watts with maximum 30Watts per port) |
|
MAC Table | 8K MAC addresses | |
Processing | Store-and-Forward | |
LED Indicators | ||
Power Indicator | Green : Power LED x 3 | |
Fault indicator | Amber : Indicate PWR1 or PWR2 failure | |
10/100/1000Base-T(X) M12 port indicator and PoE indicator | Top Green for port Link/Act indicator Middle Amber for Duplex / Collision indicator Bottom Blue for PoE power injected indicator |
|
Fault Contact | ||
Relay | Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding) | |
Power | ||
Redundant Input Power | Dual DC inputs. 24 (12~57VDC) VDC on 5-pin M23 connector | Dual DC inputs. 50~57 VDC on 5-pin M23 connector |
Power Consumption (Typ.) | 11 Watts (power consumption of P.S.E. is not included) | 6 Watts |
PoE Output Power | 60 Watts (12~24VDC) / 120 Watts (24~57VDC) | 240 Watts |
Overload Current Protection | Present | |
Reverse Polarity Protection | Present | |
Physical Characteristics | ||
Enclosure | IP-40 | |
Dimensions (W x D x H) | 125(W) x 65 (D) x 196(H) mm | |
Weight (g) | 988 g | 930 g |
Environmental | ||
Storage Temperature | -40 to 85°C (-40 to 185°F) | |
Operating Temperature | -40 to 70°C (-40 to 158°F) | |
Operating Humidity | 5% to 95% Non-condensing | |
Regulatory Approvals | ||
EMI | FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) | |
EMS | IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 | |
Shock | IEC60068-2-27 | |
Free Fall | IEC60068-2-32 | |
Vibration | IEC60068-2-6 | |
Safety | EN60950-1 | |
Warranty | 5 years |