RGS-7168GCP series are managed redundant ring Ethernet switches with 16xGigabit combo ports and 8×100/1000Base-X SFP ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your missioncritical applications from network interruptions or temporary malfunctions with its fast recovery technology. ORing’s Thunder switch series provide advanced IPbased bandwidth management which can limit the maximum bandwidth for each IP device. User can configure IP camera and NVR with more bandwidth and limit other device bandwidth. ORing’s thunder switch series also support application-based QoS. Application-based QoS can set highest priority for data stream according to TCP/UDP port number. ORing special IP police function can only permit allowed IP address with MAC address to access the network. Hacker cannot access the IP surveillance network without permission. It can avoid hacker from stealing video privacy data and attacking IP camera, NVR and controllers. ORing’s thunder series switch also provided advanced DOS/DDOS auto prevention. If there is any IP flow become big in short time, ORing’s Thunder switch will lock the source IP address for certain time to prevent the attack. It’s hardware-based prevention so it can prevent DOS/DDOS attack immediately and completely. And all functions of RGS-7168GCP series can also be managed centralized and convenient by Open-Vision 3.0, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Gigabit Fiber Ethernet application.
Feature :
- Support 24 Gigabit ports with 16 x Gigabit combo ports and 8 x Gigabit SFP ports
- Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP/RSTP/STP (IEEE 802.1s/w/D) for Ethernet Redundancy
- Supports IP-based bandwidth management
- Supports application-based QoS management
- Supports IP police security function
- Supports DOS/DDOS auto prevention
- IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
- Supports SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
- Support ACL, 802.1x User Authentication for security
- Supports 9K Bytes Jumbo Frame
- Multiple notification for warning of unexpected event
- Web-based ,Telnet, Console, CLI, and Windows utility (Open-Vision v3.0) configuration
- Support LLDP Protocol
- 19 inches rack mountable design
Specification :
| ORing Switch Model | RGS-7168GCP | RGS-7168GCP-E |
| Physical Ports | ||
| Gigabit Combo port with 10/100/1000Base-T(X) and 100/1000Base-X SFP ports | 16 | |
| 100/1000Base-X with SFP port | 8 | |
| Technology | ||
| Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.z for 1000Base-X IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) |
|
| MAC Table | 8K | |
| Priority Queues | 4 | |
| Processing | Store-and-Forward | |
| Switch Properties | Switching latency: 7 us Switching bandwidth: 48Gbps Max. Number of Available VLANs: 256 IGMP multicast groups: 128 for each VLAN Port rate limiting: User Define |
|
| Jumbo frame | Up to 9K Bytes | |
| Security Features | IP Police security feature Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security |
|
| Software Features | STP/RSTP/MSTP (IEEE 802.1D/w/s) Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging and GVRP supported IGMP Snooping IP-based bandwidth management Application-based QoS management DOS/DDOS auto prevention Port configuration, status, statistics, monitoring, security DHCP Client/Server |
|
| Network Redundancy | O-Ring STP RSTP MSTP |
|
| RS-232 Serial Console Port | RS-232 in DB9 connector with console cable. 115200bps, 8, N, 1 | |
| LED Indicator | ||
| Power Indicator | Green : Power indicator for AC | Green : Power indicator for AC and DC |
| Power-1 Indicator (PW1) | N/A | Green : Indicate Power-1 input |
| Power-2 Indicator (PW2) | N/A | Green : Indicate Power-2 input |
| Power-3 Indicator (PW3) | N/A | Green : Indicate Power-3 input |
| System Ready Indicator (STA) | Green : Indicates that the system is ready. The LED is blinking when the system is upgrading firmware. | |
| Ring Master Indicator (R.M.) | Green : Indicates that the system is operating in O-Ring Master mode. | |
| O-Ring Indicator (Ring) | Green : Indicates that the system is operating in O-Ring mode. Green Blinking: Indicates that the Ring is broken. |
|
| Fault Indicator (Fault) | N/A |
Amber : Indicates unexpected event occurred |
| Sysem Runnig Indicator (RUN) | Green : System is operating continuously | |
| Supervisor Login Indicator (RMT) | Green : System is accessed remotely | |
| Reset To Default Running Indicator (DEF) | Green : System resets to default configuration | |
| Ping Command To The Switch Indicator (Ping) | Green : System is processing “PING” request | |
| 10/100/1000Base-T(X) RJ45 Port Indicator | Left Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator Right Amber for full-duplex indicator |
|
| 100/1000Base-X SFP Port Indicator | Green for port Link/Act. | |
| Fault contact | ||
| Relay | N/A | Relay output to carry capacity of 1A at 24VDC |
| Power | ||
| Redundant Input power | 100~240VAC with power cord | 100~240VAC with power cord, dual 36 ~ 72VDC power inputs at 6-pin terminal block |
| Power consumption (Typ.) | 33 Watts | 33 Watts |
| Overload current protection | Present | |
| Physical Characteristic | ||
| Enclosure | 19 inches rack-mountable | |
| Dimension (W x D x H) | 431 (W) x 342 (D) x 44 (H) mm | |
| Weight (g) | 4350 g | 4500 g |
| Environmental | ||
| Storage Temperature | -40 to 85°C (-40 to 185°F ) | |
| Operating Temperature | -40 to 70°C (-40 to 158°F ) | |
| Operating Humidity | 5% to 95% Non-condensing | |
| Regulatory approvals | ||
| EMI | FCC Part 15, CISPR (EN55022) class A | |
| EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 | |
| Shock | IEC60068-2-27 | |
| Free Fall | IEC60068-2-32 | |
| Vibration | IEC60068-2-6 | |
| Safety | EN60950-1 | |
| MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) | 80,677 | |
| Warranty | 5 years | |
Related Posts
MOXA ioLogik E2214
Oring TPS-3082GT-M12-BP1 EN50155 10-port managed PoE Ethernet switch with 8×10/100Base-T(X) P.S.E. and 2×10/100/1000Base-T(X), M12 connector and 1xbypass included
ATEN VE607
Oring INJ-102GT-24V Industrial 2-port Gigabit High Power PoE Injector,24V~50V Input Support
ATEN VC980 Mini DisplayPort to HDMI Adapter
Oring IGPCS-E140 Industrial 4-port PCIe unmanaged Gigabit PoE Ethernet switch card with 4×10/100/1000Base-T(X) P.S.E.
ATEN IC485S RS-232/RS-485 Interface Converter
MOXA MGate MB3180